Wish List
From Fozzee.net
This page contains my general thoughts on stuff I'm either looking for, or wish I wasn't finding so often. If you happen to have something on my wishlist, let me know. Same goes if you want something on my "Wish it was gone (have)" list. As for "want" items, I'm not opposed to taking things that I might need to work on before they're worth having...
This page was recently renamed from "Junk Exchange" because it's basically a "what I'm looking for and/or that you can gift me" list, these days. It'll still have some 3rd party resource information, but that's not the focus.
Contents |
Junk Exchange Resources
- craigslist - Free, Online classifieds, for your city.
- Freecycle - Uses Yahoo Groups to facilitate transfer of stuff. Highly political. Read my Freecycle Rant.
Want / Buy
The things on the list below are mostly examples of things I'm (in a very general sense) in the market for. I'm not likely to run out and buy a whole machine shop, or every hand tool known to man, but, as I stumble across good uses for or deals on these things, I'll slowly cross them off the "wish list" and put them on the "in my garage" list (yet to come)... Obviously, if you have a good line on something here, I'm all ears. Let me know. I'm not the least bit afraid of older or beat to hell stuff, or equipment that might need some work.
- Random Stuff
- Basically anything that can be salvaged for horsepower-ish DC motors
- Random stuff for scrap square or round tubing or angle (Exercise Equipment rocks for this)
- VW / Car Suff
- A Winter Bra - Now with more padding...
- Cargo net / bungees
- Sway bars (front and rear)
- Strut tower bar (front)
- Full Suspension (High priority)
- Wheels (Also super-low priority)
- Trunk Lid Struts (2)
- New headlamps, with integrated fog lights Like These - Good Idea
- High Capacity Washer Tank - Good Idea
- Electronics Bits
- USB to RS-232 Converter
- This RFID Experimentation kit
- Hitachi simplenet - Micro-NAS
- Carputer
- M3ATX auto power supply - Good Idea
- Slick Case
- Machine Tools
- Vertical mill
- 7x14 Bed Extension - This would be slick, seeing as how I plan to continue using my 7x for the foreseeable future.
- Tooling
- V-Blocks
- Cutting Tools
- Reamers would be neat, though they're insanely expensive and I don't really "need" them...
- Large twist drills
- Fly cutters
- Smallish (less than 1/2") end mills by the pound
- A decent -> complete set of drills
- or this (much) cheaper set
- Ideally, [1] machine-screw length drills would be the best, but this set is out of the realm of reasonable.
- Lathe Things
- Quick-change Tool Post
- Magnetic Indicator Holder
- Tailstock Cam-lock - I'm planning to make one just like this.
- 4-jaw chuck
- My ENCO List
- Endmills
- 1-2-3 blocks
- Sil-Carb Grinding Wheels
- Hand tools
- Tap/Die Set (Metric and SAE, preferred)
- Sometime, I should build one of these hand-tapping stands, because at $44, they're overpriced.
- Transfer Punches (or the HF equivalent)
- T-Handle Hex Keys
- A tool belt of some kind...
- Tap/Die Set (Metric and SAE, preferred)
- Welding Stuff
- MIG welding Gas Bottle (like 20cf or so)
- Either a Plasma or Oxy setup (very low priority)
- Technology
- APC BR1500 UPS
- Or something else around the 1500va mark... Rackmount form factor (or similar) highly preferred
- Stuff for building a new desktop PC, which, basically is a newegg gift certificate, as piecing together a system from gifts is really hard and not always cost-effective overall...
- APC BR1500 UPS
- Broken Portable electronics, specifically:
- MP3 Players
- Laptops (damaged screens, etc OK)
- PDAs
- Broken Portable electronics, specifically:
Have / Sell
- "Repaired" iPod Shuffle (USB connector has been... upgraded)
- Various computer and electronic hardware, PC parts, rackmount gear, etc etc. Inquire within.
